Even though we have this part in stock, it may take several days for internal process to complete. Goods will be delivered within 5 -7 working days.
Unit type : CJ-series Special I/O Unit
Isolation *1 : Between I/O and Controller signals: Photocoupler (No isolation between I/O signals.)
External terminals : 18-point detachable terminal block (M3 screws)
Power consumption : 5 VDC, 120 mA max.
External power supply *2: 24 VDC (inrush current: 20 A max., pulse width: 1 ms min.)
External power supply *2: 140 mA max.
Dimensions (mm): 31 × 90 × 65 mm (W × H × D)
Weight: 150 g max.
General specifications: Conforms to general specifications for CJ-series Series
Number of analog outputs : 2
Output signal range *3: 1 to 5 V/4 to 20 mA, 0 to 5 V, 0 to 10 V, -10 to 10 V
Output impedance: 0.5 O max. (for voltage output)
Max. output current (for 1 point): 12 mA (for voltage output)
Maximum permissible load resistance: 600 O (current output)
Set data: 16-bit binary data
Accuracy *4 : 25°C Voltage output: ±0.3% of F.S., Current output: ±0.5% of F.S.
Accuracy *4 : 0°C to 55°C Voltage output: ±0.5% of F.S., Current output: ±0.8% of F.S
D/A conversion period *5: 1.0 ms per point
Output functions: Output hold function
Outputs the specified output status (CLR, HOLD, or MAX) under any of the following circumstances.
When the Conversion Enable Bit is OFF. *6
In adjustment mode, when a value other than the output number is output during adjustment. *7
When output setting value error occurs or Controller operation stops.
When the Load is OFF
Shipping Weight: 1.2 Kg