Estimated Lead Time : In stock. Usually ships in 7-10 working days.
Manufacturer : Mitsubishi Electric
FX1N-1DA-BD
Analog output board FX1N – 1DA – BD
Analog output Analog output range Voltage output : DC 0 V to 10 V (external load resistance 2 k惟 to 1 M惟)
Current output : DC 4 mA to 20 mA (external load resistance 500 惟 or less)
Number of output channels : 1 channel
Output characteristics : Output characteristics can not be adjusted.
Digital input Voltage output : 12 bit binary
Current output : 11 bit binary
resolution Voltage output : 2.5 mV (10 V x 1/4000)
Current output : 8 渭A (16 mA X 1/2000)
Overall precision Voltage output : 卤 1% (卤 0.1 V) for full scale 10 V
Current output : 卤 1% (卤 0.16 mA) for full scale 16 mA
D / A conversion time : Approximately 10 ms (D / A conversion started with the END instruction, output after approximately 10 ms)
Insulation method : No isolation between analog input and sequencer, between channels
Number of occupied I / O points : 0 point (It does not relate to the maximum input / output point number of the sequencer)
Application sequencer : FX 1 S (V 2.0 or later), FX 1 N (V 2.0 or later)
Power supply : Internal power supply from the sequencer
Ambient temperature : 0 to 55 掳 C. … Operating -20 to 70 掳 C. … Save
Relative humidity : 35 to 85% RH (noncondensing)…at operation
Anti-vibration When DIN rail is installed Frequency: 10 to 57 Hz : Amplitude: 0.035 mm X, Y, Z 10 times in each direction (80 minutes in total)
Frequency: 57 to 150 Hz : Acceleration: 4.9 m / s 2 X, Y, Z 10 times in each direction (80 minutes in total)
Direct installation Frequency: 10 to 57 Hz : One amplitude: 0.075 mm X, Y, Z 10 times in each direction (80 minutes in total)
Frequency: 57 to 150 Hz : Acceleration: 9.8 m / s 2 10 times in X, Y, Z directions (80 minutes in total)
Impact resistance : 147 m / s 2 , working time 11 ms, three times in X, Y, Z directions with a sine half-wave pulse
Noise immunity : Noise voltage with 1,000 Vp-p, noise width 1 渭s, rising 1 ns, with noise si
tor with period of 30 to 100 Hz
Withstand voltage : Non-insulated between analog output part and PLC main body (Do not perform withstand voltage test)
Insulation resistance : Non-insulated between the analog output part and the programmable controller (Do not conduct the insulation resistance test)
Use atmosphere : There is no corrosive property, flammable gas, conductive dust (dust) is not serious
Use altitude : It can not be used under an environment pressurized to 2,000 m or less under atmospheric pressure. It may break down.
Shipping Weight : 1.5 Kg
