FX2N-20GM

FX2N-20GM

Positioning unit FX2N-20GM

$543.06

  • Estimated Lead Time : In stock. Usually ships in 7-10 working days.
  • Manufacturer : Mitsubishi Electric
  • FX2N-20GM
  • Positioning unit
  • FX2N-20GM
  • Number of control axes : (Independent / simultaneous) 2 Axis
  • Interpolation function : 2 axis linear interpolation, 2 axis circular interpolation
  • Pulse output method : Open collector method
  • Pulse output form : Forward rotation / reverse rotation pulse train, pulse train + direction
  • Maximum frequency : 200 kHz (100 kHz in interpolation operation)
  • Acceleration / deceleration processing : Automatic trapezoidal acceleration / deceleration
  • Control unit : pulse, mm, 10 -1 inch, deg
  • Positioning range : -999,999 to + 999,999 [X (minimum command unit) pulse] -999,999 to + 999,999 [X (minimum command unit) mm] -999,999 to + 999,999 [X (minimum command unit) X 10 -1 inch] -999,999 + 999,999 [X (minimum command unit) deg] The minimum command unit can be set to x 1, x 10 -1 , x 10 -2 or x 10 -3 in the parameter. However, at the time of Pulse unit, X 1, X 10 1 , X 10 2 , X 10 3
  • Programming language : cod number system
  • Position data : Block specification (X axis, Y axis, simultaneous 2 axes): 0 to 99 (100 blocks)
  • Manual pulsar connection : Connectable (open collector type)
  • Absolute position detection (ABS current value reading) : Set by parameter
  • Program memory : 7.8 k steps (internal RAM, battery backup)
  • Number of occupied I / O points : Sequencer input / output 8 points occupation (It can count either input or output)
  • Application sequencer : FX2N, FX3U, FX2NC, FX3UCFX2NC – CNV – IF is required for connection to FX2NC. To connect to FX3UC, FX2NC – CNV – IF or FX3UC – 1PS – 5V is required.
  • mass : 0.4 Kg
  • Power-supply voltage : DC 24 V + 10% -15% (external power supply)
  • Allowable momentary power outage time : Continue operation against momentary power failure of 5 ms or less
  • power consumption : 10 W
  • Power supply fuse : 125V 1A
  • Input specification :
  • Control input Operation switch : MANU (manual operation) / AUTO (automatic operation)
  • Operating system : FWD (manual forward rotation), RVS (manual reverse rotation), ZRN (mechanical origin return), START (automatic start), STOP (stop), manual pulsar (X 0 to X 7 are shared with general input and interrupt input) Operation input (by parameter setting)
  • Mechanical system : DOG (near point signal), LSF (forward rotation limit), LSR (reverse rotation limit), 4 interrupts (X 0 to X 7 general-purpose input, shared with manual pulsar input)
  • Servo system : SVRDY (servo ready), SVEND (servo end), PG 0 (zero point signal)
  • General purpose : Body X 0 to X 7 (shared with interrupt input, manual pulsar input) Expansion block connection allows addition of X 10 to X 67 (octal number)
  • Input signal voltage START, STOP, ZRN, FWD, RVS, LSF, LSR, DOG, X 0 to X 7 : DC24V 卤 10% (internal power supply)
  • SVRDY, SVEND, PG 0 : DC 5 V to 24 V 卤 10%
  • Input signal format : Contact input or NPN open collector transistor input
  • Input signal current START, STOP, ZRN, FWD, RVS, LSF, LSR, DOG, SVRDY, SVEND, X 0 to X 7 : 7 mA / 24 VDC
  • PG 0 : 11.5 mA / 24 VDC
  • Input ON sensitivity START, STOP, ZRN, FWD, RVS, LSF, LSR, DOG, X 0 to X 7 : 4.5 mA or more
  • SVRDY, SVEND : 0.7 mA or more
  • PG 0 : 1.5 mA or more
  • Input OFF sensitivity START, STOP, ZRN, FWD, RVS, LSF, LSR, DOG, X 0 to X 7 : 1.5 mA or less
  • SVRDY, SVEND : 0.3 mA or less
  • PG 0 : 0.5 mA or less
  • Input capture speed START, STOP, ZRN, FWD, RVS, LSF, LSR, SVRDY, SVEND : About 3 ms
  • DOG : About 0.5 ms
  • PG 0 : About 16 渭s
  • X 0 to X 7 (when used as general-purpose input) : About 3 ms
  • X0 to X7 (manual pulser, when used as interrupt input) : About 0.1 ms
  • Circuit insulation : Photocoupler insulation
  • Input operation display : LED ON when input is ON
  • Number of output points Positioning unit drive output : 3 points (FP, RP, CLR)
  • Positioning unit general-purpose output : 8 points (Y00 to Y07)
  • Output form FP, RP : You can select forward (FP) / reverse (RP) pulse train or pulse train (PLS) + direction (DIR).
  • CLR : It turns ON when homing operation is completed.
  • Output method : Open collector transistor output
  • Rated load voltage FP / RP : DC 5 V to 24 V (power supplied from the VIN terminal)
  • CLR : DC 5V to 24V
  • Maximum load current Positioning unit drive output : 20 mA
  • Positioning unit general-purpose output : 50 mA
  • Maximum voltage drop during ON : 0.5 V or less (CLR is 1.5 V or less)
  • Leakage current when OFF : 0.1 mA / DC 24 V or less
  • Output frequency : 200 kHz (100 kHz at interpolation)
  • Output operation indication : LED on when output is ON
  • Ambient temperature : 0 to 55 掳 C. … Operating, -20 to 70 掳 C….when saved
  • Relative humidity : 35 to 85% RH (noncondensing)…. in operation
  • Anti-vibration When DIN rail is installed Frequency: 10 to 57 Hz : One amplitude: 0.035 mm X, Y, Z 10 times in each direction (80 minutes in total)
  • Frequency: 57 to 150 Hz : Acceleration: 4.9 m / s 2 X, Y, Z 10 times in each direction (80 minutes in total)
  • Impact resistance : 147 m / s 2 , working time 11 ms, three times in X, Y, Z directions with a sine half-wave pulse
  • Noise immunity : Noise voltage with 1,000 Vp-p, noise width 1 渭s, rising 1 ns, with noise si
  • tor with period of 30 to 100 Hz
  • Withstand voltage : Between external terminals and ground terminal: 500 VAC for 1 minute
  • Insulation resistance : Between external terminal and ground terminal: 500 MV DC 500 M惟 or more with insulation resistance meter
  • ground : Class D grounding (grounding resistance: 100 惟 or less)Grounding should be dedicated ground or common ground.
  • Use atmosphere : There is no corrosive property, flammable gas, conductive dust (dust) is not serious
  • Use altitude : Can not be used in an environment pressurized to 2000 m or less under atmospheric pressure. It may break down.
  • Shipping Weight : 1.4 Kg