Estimated Lead Time : In stock. Usually ships in 7-10 working days.
Manufacturer : Mitsubishi Electric
AJ65VBTCE3-16D
CC-Link small type remote I / O unit (DC input, sensor connector (e-CON)) AJ65VBTCE3-16D
Input format : DC input (plus common type)
Number of input points : 16 points
Rated input voltage : DC 24 V (ripple ratio within 5%) (Allowable voltage range DC 19.2 to 26.4 V)
Rated input current : About 5 mA
Maximum number of simultaneous input points : 100% (when mounted on the front), see the derating chart except when front mounted
ON voltage / ON current : 14 V or more / 3.5 mA or more
OFF voltage / OFF current : 6 V or less / 1.7 mA or less
Input resistance : About 4.7 k惟
Input response time OFF ??ON : 1.5 ms or less (24 VDC)
ON ??OFF : 1.5 ms or less (24 VDC)
Input common type : 16 points 1 common (Sensor connector (e – CON) type 3 wire type)
Input isolation method : Photocoupler isolation
Withstand voltage : Between DC external terminal and ground: AC 500 V for 1 minute
Insulation resistance : DC external terminal collective to ground: 500 VDC DC insulation resistance meter 10 M惟 or more
Protection grade : IP 1 XB
Station type : Remote I / O station
Number of occupied stations : 1 station
Unit power supply Voltage : DC 20.4 to 26.4 V (ripple ratio within 5%)
Current : 35 mA or less (24 VDC, all points ON)
External wiring connection method : Communication unit: One-touch connector for communication (sold separately) Unit power supply unit, I / O power supply unit: Power supply . FG one-touch connector (sold separately) Input / output unit: sensor connector (e-CON)
communication cable : Ver.1.10 compatible CC-Link dedicated cable: FANC-110SBH, FA-CBL 200PSBH, CS-110
External dimensions Height (H) : 50 mm
Width (W) : 100 mm
Depth (D) : 45.5 mm
mass : 0.10 Kg
Operating ambient temperature : 0 to 55 掳 C
Storage ambient temperature : -20 to 75 掳 C
Ambient operating humidity : 10 to 90% RH, non condensing
Storage ambient humidity : 10 to 90% RH, non condensing
Anti-vibration Meets JIS B 3502, IEC 61131-2 When there is intermittent vibration : Frequency: 5 to 8.4 Hz, One amplitude: 3.5 mm Frequency: 8.4 to 150 Hz, Constant acceleration: 9.8 m / s 2 Sweep count: 10 times in X, Y, Z directions
When there is continuous vibration : Frequency: 5 to 8.4 Hz, One amplitude: 1.75 mm Frequency: 8.4 to 150 Hz, Constant acceleration: 4.9 m / s 2
Impact resistance : Meets JIS B 3502, IEC 61131-2 (147 m / s 2 , 3 times in each of X, Y and Z directions)
Use atmosphere : No corrosive gas
Use elevation : 0 to 2000 m
Installation location : In the control panel
Over voltage category : II or less
Pollution degree : 2 or less
Shipping Weight : 1.1 Kg