ET serial ignition transformer with high voltage cable connection pin and power cable, suitable to be installed in burner control box, can be wildly used with oil, gas and dual fuel burners.
Enables big spark deformation on burners with a high fire-rating or high combustion-air velocity.
In addition to this, it generates the lowest electromagnetic interferences of all known electronic ignition devices, which is especially important if the burner has to comply with EN 55014-2.
ET serial ignition transformer combines a low power consumption with a low inrush current.
The operation must be intermittent ignition, work-cycle limit of 3 minutes, in which the ignition time is less than 1 minute, it means 33 % E.D. in 3 minutes
Power supply: 230 V~ (-15 ??+10%), 0.25 A, 50/60 Hz
Reviews
There are no reviews yet.