FX2NC-16EYT

FX2NC-16EYT

FX2NC-16EYT –Mitsubishi — Output extension block

$94.50

  • Estimated Lead Time : 3 – 5 working days.
  • Manufacturer : Mitsubishi Electric
  • FX2NC-16EYT
  • Output extension block FX 2 NC – 16 EYT
  • Application sequencer FX1NC, FX3GC, FX2NC, FX3UC
  • mass 0.15 Kg
  • Power supply specification
  • Rated voltage Internal power supply from the sequencer
  • power consumption 0.35 W
  • Output specification
  • Number of output points 16 points
  • Output connection shape connector
  • Output type / format Transistor / sink output
  • External power supply DC 5V to 30V
  • Maximum load Resistive load Total load current per 0.1 A / point common (8 points) should be 0.8 A or less.
  • Inductive load 2.4 W / 1 point (24 VDC)
  • Open-circuit leakage current 0.1 mA or less / DC 30 V
  • ON voltage 1.5V or less
  • Response time OFF ? ON 0.2 ms or less / 100 mA
  • ON ? OFF 0.2 ms or less / 100 mA
  • Circuit insulation Photocoupler insulation
  • Output operation indication LED on when driving photo coupler
  • Output circuit configuration
  • Ambient temperature 0 to 55 掳 C. … Operating -20 to 70 掳 C. … Save
  • Relative humidity 35 to 85% RH (noncondensing)…. in operation
  • Anti-vibration When DIN rail is installed Frequency: 10 to 57 Hz One amplitude: 0.035 mm X, Y, Z 10 times in each direction (80 minutes in total) The criteria are based on IEC 61131-2
  • Frequency: 57 to 150 Hz Acceleration: 4.9 m / s 2 Ten times in each of X, Y, Z directions (80 minutes in total in total) The criterion is based on IEC 61131-2
  • Impact resistance 147 m / s 2 , working time 11 ms, criterion for judgment three times in X, Y, Z directions by sine half-wave pulse is according to IEC 61131-2
  • Noise immunity Noise voltage with 1,000 Vp-p, noise width 1 碌s, rising 1 ns, with noise si
  • tor with period of 30 to 100 Hz
  • Withstand voltage Between the output terminal (transistor) of the expansion output block and the earth terminal: AC 500 V for 1 minute
  • Insulation resistance Between the output terminal (transistor) and the earth terminal of the expansion output block: 5 MO or more with DC 500 V insulation resistance meter
  • Use atmosphere There is no corrosive property, flammable gas, conductive dust (dust) is not serious
  • Use altitude Can not be used in an environment pressurized to 2000 m or less under atmospheric pressure. It may break down.
  • Shipping Weight : 1.2 Kg