Estimated Lead Time: 7 – 10 Working Days
Manufacturer: Mitsubishi Electric
Product No : FX3U-4AD-ADP
Product type : Analog Input Special Adapter
Analog input Analog input range Voltage input : DC0V ~ 10V (input resistance 194kO)
Current input : DC4mA ~ 20mA (input resistance 250O)
The number of input channels 4 channel
The absolute maximum input Voltage input : -0.5V, + 15V
Current input : -2mA, + 30mA
Input characteristic : For each channel, you can set the input mode (voltage / current input) is.
Digital output Voltage input : 12bit binary
Current input : 11bit binary
resolution Voltage input : 2.5mV (10V 脳 1/4000)
Current input : 10碌A (16mA 脳 1/1600)
Overall accuracy Voltage input : Ambient temperature 25 掳C卤 5 掳C: 0.5% 卤 with respect to full-scale 10V (卤 50mV)
ambient temperature 0 掳C~ 55 掳C: full scale 10V for 卤 1.0% (卤 100mV)
Current input : Ambient temperature 25 掳C卤 5 掳C: 0.5% 卤 with respect to full-scale 16mA (卤 80碌A)
ambient temperature 0 掳C~ 55 掳C: full scale 16mA for 卤 1.0% (卤 160碌A)
A / D conversion time-FX3U / FX3UC PLC : 200碌s (every calculation cycle update of the data)
FX3S / FX3G / FX3GC sequencer : 250碌s (every calculation cycle update of the data)
Insulation method Analog input and inter-sequencer, insulated by photo-coupler
is between the power supply and the analog input section, insulated by a DC / DC converter
is between-each channel, non-isolated
O occupied points : 0 points (no relation to the maximum input and output points of the sequencer)
Apply sequencer : FX3S, FX3G, FX3U, FX3GC, FX3UC (FX3UC-32MT-LT since Ver.1.20)
connection to the FX3S is required FX3S-CNV-ADP.
Connection to the FX3G is required FX3G-CNV-ADP.
Connection to the FX3U and FX3UC-32MT-LT (-2), you must have the function expansion board.
mass : 0.1kg
Power Specifications
Power supply : DC5V 15mA (internal power supply from the sequencer)
DC24V Tasu 20 Pasento -15 Pasento 40MA (external power supply)
Ambient temperature : 0 ~ 55 掳C -25 ~ 75 掳C during storage operations
Relative humidity : 5 ~ 95% RH (non-condensing) …… operation
Vibration resistance- When the DIN rail mounting Frequency: 10 ~ 57Hz : Half amplitude: 0.035mm X, Y, Z each direction 10 times (for a total of each 80 minutes)
Frequency: 57 ~ 150Hz : Acceleration: 4.9m / s2 X, Y, Z each direction 10 times (for a total of each 80 minutes)
Direct mounting at the time-Frequency: 10 ~ 57Hz : Half amplitude: 0.075mm X, Y, Z each direction 10 times (for a total of each 80 minutes)
Frequency: 57 ~ 150Hz : Acceleration: 9.8m / s2 X, Y, Z each direction 10 times (for a total of each 80 minutes)
Impact : 147m / s2, duration of action 11ms, X at half-sine pulse, Y, Z directions 3 times each
Anti-noise : Noise voltage 1,000Vp-p, noise width 1碌s, due to rising 1ns, cycle 30 ~ 100Hz of noise simulator
Withstand voltage : All terminals and between the ground terminal: AC500V 1 minute
Insulation resistance : All terminals and between the ground terminal: DC500V 5MO more in insulation resistance tester
ground : Class D grounding (ground resistance: 100O or less)
ground, please dedicated ground or shared ground.
Use atmosphere : Corrosive, there is no flammable gas, conductive dust (dust) that is not terribly
Advanced use : 2000m or less
can not be used in the pressurized environment to more than atmospheric pressure. There is a possibility of failure.
Shipping Weight: 1.5 Kg