AJ65SBTB32-8DT

AJ65SBTB32-8DT

CC-Link small type remote I / O unit (DC input / transistor output, terminal block) AJ65SBTB32-8DT

$108.90

  • Estimated Lead Time : In stock. Usually ships in 7-10 working days.
  • Manufacturer : Mitsubishi Electric
  • AJ65SBTB32-8DT
  • CC-Link small type remote I / O unit (DC input / transistor output, terminal block) AJ65SBTB32-8DT
  • Input specification :
  • Input format : DC input (plus common type)
  • Number of input points : 4 points
  • Rated input voltage : DC 24 V (ripple ratio within 5%) (Allowable voltage range DC 19.2 to 26.4 V)
  • Rated input current : About 7 mA
  • Maximum number of simultaneous input points : 100%
  • ON voltage / ON current : 14 V or more / 3.5 mA or more
  • OFF voltage / OFF current : 6 V or less / 1.7 mA or less
  • Input resistance : About 3.3 k惟
  • Input response time OFF ??ON : 1.5 ms or less (24 VDC)
  • ON ??OFF : 1.5 ms or less (24 VDC)
  • Input isolation method : Photocoupler isolation
  • Output format : Transistor output (sink type)
  • Number of output points : 4 points
  • Rated load voltage : DC 24V
  • Used load voltage range : DC 19.2 to 26.4 V (ripple ratio within 5%)
  • Maximum load current : 0.5 A / 1 point, 1.2 A / 1 common
  • Maximum inrush current : 1.0 A less than 10 ms
  • Leakage current at OFF : 0.25 mA or less
  • Maximum voltage drop during ON : DC 0.3 V or less (TYP.) 0.5 A, DC 0.6 V or less (MAX.) 0.5 A
  • Output response time OFF ??ON : 0.5ms or less
  • ON ??OFF : 1.5 ms or less (resistance load)
  • Protection function : Overload protection function, overvoltage protection function, overheat protection function
  • Output section External power supply Voltage : DC 19.2 to 26.4 V (ripple ratio within 5%)
  • Current : 14.6 mA or less (24 VDC, when all points are ON) External load current is not included
  • Output isolation method : Photocoupler isolation
  • Common method : 8 points / common (Input: terminal trapezoidal 3 wire type, output: terminal trapezoid 2 wire type)
  • Withstand voltage : Between DC external terminal and ground: AC 500 V for 1 minute
  • Insulation resistance : DC external terminal collective to ground: 500 VDC DC insulation resistance meter 10 M惟 or more
  • Protection grade : IP2X
  • Station type : Remote I / O station
  • Number of occupied stations : 1 station
  • Unit power supply Voltage : DC 20.4 to 26.4 V (ripple ratio within 5%)
  • Current : 45 mA or less (24 VDC, all points ON)
  • External wiring connection method : Communication unit, Unit power supply unit: 7 points 2-piece terminal block (M3 screw) I / O power supply unit, input / output unit: 18 points Direct mounting terminal block (M3 screw)
  • External dimensions Height (H) : 50 mm
  • Width (W) : 118 mm
  • Depth (D) : 40 mm
  • mass : 0.18 Kg
  • Operating ambient temperature : 0 to 55 掳 C
  • Storage ambient temperature : -20 to 75 掳 C
  • Ambient operating humidity : 10 to 90% RH, non condensing
  • Storage ambient humidity : 10 to 90% RH, non condensing
  • Anti-vibration Meets JIS B 3502, IEC 61131-2 When there is intermittent vibration : Frequency: 5 to 8.4 Hz, One amplitude: 3.5 mm Frequency: 8.4 to 150 Hz, Constant acceleration: 9.8 m / s 2 Sweep count: 10 times in X, Y, Z directions
  • When there is continuous vibration : Frequency: 5 to 8.4 Hz, One amplitude: 1.75 mm Frequency: 8.4 to 150 Hz, Constant acceleration: 4.9 m / s 2
  • Impact resistance : Meets JIS B 3502, IEC 61131-2 (147 m / s 2 , 3 times in each of X, Y and Z directions)
  • Use atmosphere : No corrosive gas
  • Use elevation : 0 to 2000 m
  • Installation location : In the control panel
  • Over voltage category : II or less
  • Pollution degree : 2 or less
  • Shipping Weight : 1.2 Kg